Boilers Water Groups Spare Parts

Diaphragm kit Hermann boiler

The kit (diameter: 70 mm) is part of the boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Stuffing box Hermann boiler

The stuffing box is part of the Hermann boiler spare parts and it can be installed of the following boilers, although it may change depending on the specific serial number:

• Comfort 29 SE/325 SE
• Ecolaser 20 E/20 SE
• Foris 321 E/321 SE
• Laser 21 S21 SE//24 E/24 SE/29 E/29 SE/21/21 E/25/25 E/25 S/25 SE
• Laser 321/321 S/321 SE/321 E/325 E/325 SE
• Laser 221/221 S/221 SE/221 E/225 E/225 S/225 SE
• Spazio Due 321 SE
• Spazio 24 SE SB GLP (2008)

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Maintenance kit for 3-way diverter valve Hermann boiler

The kit is part of the Hermann boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Honeywell cartridge VCZZ6000 for three way valve Hermann boiler

The cartridge VCZZ6000 is part of the Hermann boiler spare parts and it can be installed of the following boilers, although it may change depending on the specific serial number:

• Acquaplus Condensing
• Comfort
• Ecolaser
• Eura
• Eura Condensing
• Eura Top
• Eura Top Condensing
• Integra IN Solar
• Laser
• Master
• Master Inox
• Polar
• Spazio Due
• Spazio Uno
• Spazio Tre
• Spazio Zero
• Supermaster Inox
• Super Micra System Boiler

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Flow switch float Hermann boiler

The flow switch float is part of the Hermann boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

By pass kit Hermann boiler

The by pass kit is part of the Hermann boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Lockshield kit with built-in flow meter 0÷4 l/min for bar manifold Emmeti boiler

The lockshield kit is part of the Emmeti boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Electrothermal head with auxiliary micro (4 A 250 V) normally closed Emmeti boiler

The electrothermal head is part of the Emmeti boiler spare parts.

• Absorption: 3,45 VA (230 V) 3 VA (24 V)
• Protection: IP 40 (IP 44 vertical posizion)
• Cable length: 1 m
• Auxiliary contact capacity: 4 A 250 V
• Inrush current: 0,35 A (model 24 V) - 0,25 A (model 230 V)
• Opening / closing time: 5-6 min

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Lockshield kit for Emmeti boiler

The lockshield kit is part of the Emmeti boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Terminal pair with manual air vent valve and filling tap Emmeti boiler

The terminal pair is part of the Emmeti boiler spare parts and it can be installed of the following boilers, although it may change depending on the specific serial number:

• Attack: 1"
• 1/2" manual air vent valve
• 1/2" filling / drain tap with 3/4" attack

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Electrothermal head with auxiliary micro (4 A 250 V) normally closed Emmeti boiler

The electrothermal head is part of the Emmeti boiler spare parts and it can be installed of the following boilers, although it may change depending on the specific serial number:

• Absorption: 3,45 VA (230 V) 3 VA (24 V)
• Protection: IP 40 (IP 44 posizione verticale)
• Cable length: 1 m
• Auxiliary contact capacity: 4 A 250 V
• Inrush current: 0,35 A (modello 24 V) - 0,25 A (modello 230 V)
• Opening / closing time: 5-6 min

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.

Seat holder and meter for manifolds 1"-24x19 Emmeti boiler

The kit is part of the Emmeti boiler spare parts.

In order to avoid the purchase of wrong products, we suggest to send the identification label of your boiler to our customer service via email or whatsapp.